Sheet metal & fabrication in India. Faridabad, Mandi Gobindgarh and Moradabad.
Sheet metal and fabrication covers laser cutting, punching, bending, stamping, welding and finishing of steel, stainless and aluminium sheet into enclosures, brackets and structures. India's strongest clusters are Faridabad, Pune, Chennai, Bengaluru and Mandi Gobindgarh, with Moradabad specialising in decorative metalwork.
Named shortlist from USD 390
- 3
- mapped clusters
- 9
- methods covered
- 3
- product guides
- Sheet metal & fabrication clusters
- Other clusters
How it is done.
The methods Indian factories run under sheet metal & fabrication, and the materials they work in.
Methods
- Fibre laser cutting
- CNC turret punching
- CNC press-brake bending
- Progressive and transfer die stamping
- Deep drawing
- MIG, TIG and spot welding
- Powder coating and wet painting
- Galvanising and zinc plating
- Hardware insertion (self-clinching fasteners)
- Typical MOQ
- Laser-cut and bent parts from 50–100 pieces; stamped parts usually need 5,000+ pieces to justify press tools.
3 clusters, largest first.
Each cluster page covers what the city is known for, its nearest ports and the clusters around it.
Products that use it.
Step-by-step process chains, QA tests, HS headings and lead times.
Buy it with confidence.
What experienced buyers put in the RFQ and check on arrival.
- Give drawings with sheet thickness, bend radii and tolerances so the supplier can check the flat pattern.
- Specify the coating system and salt-spray hours (e.g. 500 h to ISO 9227), not just 'powder coated'.
- Check weld quality, flatness and coating thickness on first articles.
Straight answers.
Anything else, ask us directly. A principal replies, not a bot.
anirudh@sourcesquid.coWhat is the difference between laser-cut and stamped parts?
Laser cutting needs no tooling and suits low to medium volumes. Stamping needs a die but gives the lowest piece price at high volumes.
Can Indian fabricators make IP-rated enclosures?
Yes. Fabricators around Faridabad, Pune and Bengaluru make electrical and electronic enclosures with gaskets and sealed welds. Ask for IP test evidence on your design.
Which finishes are common?
Powder coating, zinc plating, hot-dip galvanising, and brushed or passivated stainless steel are all widely available.
Related process families.
A named shortlist of sheet metal and fabrication factories.
Send one drawing, photo or quote. We return the process chain, the right cluster and named factories, and a realistic target price.